Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.13580196
- Product Categories
- Friendly Links
- home > Supply > Shenzhen Wang Lifeng Technology supply 4 inch, 6 inch, 8 inch extended crystal machine, good quality, good service
Shenzhen Wang Lifeng Technology supply 4 inch, 6 inch, 8 inch extended crystal machine, good quality, good service
Information Name: | Shenzhen Wang Lifeng Technology supply 4 inch, 6 inch, 8 inch extended crystal machine, good quality, good service |
Published: | 2014-10-15 |
Validity: | 1000 |
Specifications: | 4 inch, 6 inch, 7 inch, 8 inch |
Quantity: | 10000.00 |
Price Description: | |
Detailed Product Description: | Product Name: 4-inch extended crystal machine function: one, the machine uses CXL-220KJ-4/6 lenses expansion machine is widely used in light-emitting diode crystal, small and medium power transistors, integrated circuits and some special semiconductor devices within manufacturing enterprises Reap the expansion process. Second, the machine features: ① double cylinder up and down control; ② thermostat design, even a modest expansion of the membrane surrounding; ③ heating, stretching, expanding crystal, solid film once completed; ④ heating temperature, dilation of time, the return rate even adjustable; ⑤ simple, single-class yield; ⑥ see the physical appearance of the machine. Third, the technical parameters: 1, supply voltage: 220VAC (50Hz) ± 10% 2, working pressure: 4Kg / cm2 3, Temperature range: room temperature ~ 350 ℃ 4, the cylinder stroke: 150 / 200mm 5, under the cylinder stroke: 100mm (two-way adjustable) 6, the expansion area: 120 / 270cm2 7, Dimensions: 270x220x820mm (L x W x H) 8, Weight: 20Kg four steps: one, plug in the power, connect the high-pressure pipe quick connector trachea; 2, turn on the power switch, the temperature was set at 60 ℃ (different wafers film temperature difference ± 5 ℃); 3, the cylinder will switch to the "up" position, the die back to the top, the lower cylinder switch to the lowered position, the lower die back to the bottom of the (repeated several times under the cylinder moves, the rate of increase will be adjusted to fit speed) 4, release the lock, set off on the workpiece plate, first put on the inner ring extended crystal on the lower die, and then turn sticky wafer crystal film placed in the center under the workpiece, the chip facing up, on the workpiece plate cover, locking latch. 5, the lower cylinder switch to the "up" position, the lower die slowly rising, the film began to spread around, the grains gradually widening the interval, when the wafer spacing spread to two to three times the original only stopped rising, will be extended Crystal rounded down flat on the outer ring and the inner ring just above the film. 6, the cylinder will switch to "down" position, the upper die down after turning the proliferation crystal film sets tight position, the die back to the top. 7, the lower cylinder switch to the "down" position, the lower die down to the bottom, turning out finished expanding crystal crystal film, trim the excess membrane surface, send the next process equipment glue solid crystal. V. Maintenance: 1, attached with a clean cloth to wipe dust, moving parts regularly coated with a little oil lubrication; 2, place turned crystal film location must be clean, grease and dust attached contaminate wafers, resulting in defective products. VI Notes: 1, cylinder working Never put your hands near or into the laminated surface; 2, lower die surface Do not use sharp percussion, friction, prevent the formation of scars; 3, when the machine is installed, should be properly reliable ground; 4, the chassis power supply dangerous, the door should be locked; 5, the replacement of the heating pipes or other electrical components, to be carried out only when the power plug is unplugged; 6, do not use cloth with water or solvent wipe machine, in order to avoid leakage or fire hazard. Seven, after-sales service: one year warranty and lifetime maintenance. |
Admin>>>
You are the 5772 visitor
Copyright © GuangDong ICP No. 10089450, Wang Lifeng Technology Co., Ltd. of Shenzhen City All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 5772 visitor
Copyright © GuangDong ICP No. 10089450, Wang Lifeng Technology Co., Ltd. of Shenzhen City All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility